Tile stills for GhostFrame are captured from the active video displaying on the tile. Easiest approach is to upload the still image into HELIOS following the below steps:
- Go to Settings
- Go to Still Store
- Upload the image
- (a or b) "Show" the still
Once the desired image is displaying on the screen, capture the still store on the tiles. Follow the below steps to do this:
- Drop down the "Tile still 1" menu
- Press the "Capture" button
- Assign desired slices to the "Tile still 1" content
- Turn off the "Show still" in the Video Patterns (above screenshot)
Note - Tile still are stored in the temporary memory on the tiles. If you power cycle/reboot the tiles, you will need to recapture the image.